The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Spehro Pefhany"
Subject: Re: How to make/solder a circuit fast?
User-Agent: tin/pre-1.4-19990216 ("Styrofoam") (UNIX) (Linux/2.2.14 (i586))
Date: Fri, 13 Sep 2002 09:56:02 GMT
NNTP-Posting-Date: Fri, 13 Sep 2002 05:56:02 EDT
In sci.electronics.design The little lost angel wrote:
> Can anybody please suggest the most efficient of doing this?
You can either get a proto board house to make these up (single or
double sided) or print, etch, drill and cut all those boards to size
I know which one I'd pick, but your choice might be different. If I had to
do it by hand (not my choice) it would probably take about 3 hours total,
assuming material in stock and things going well, including layout, not
including assembly, assuming 1,000 holes altogether. I'd do them maybe
20-up (5" x 4"), 3 pieces, and only cut them apart after they were
If you don't have the tools to do it, add more on for that, the exact
amount depending on your patience and ingenuity.
"it's the network..." "The Journey is the reward"
firstname.lastname@example.org Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup