The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Richard Haendel"
References: <email@example.com> <firstname.lastname@example.org>
Subject: Re: How to make/solder a circuit fast?
X-Newsreader: Microsoft Outlook Express 5.00.2919.6600
Date: Fri, 13 Sep 2002 20:50:32 GMT
NNTP-Posting-Date: Fri, 13 Sep 2002 20:50:32 GMT
Organization: AT&T Worldnet
Unless your budget is real small, I'd recommend ExpressPCB's min-board
service. You get 3, 3.8" x 2.5" boards for only $62, including shipping. I
don't know how much the stuff costs to make them yourself, but in my
opinion, it's just not worth the hassle.
"The little lost angel" wrote in
> On Fri, 13 Sep 2002 01:39:10 -0400, "Boris Nogoodnik"
> >You may want to try the way pcbs are always have been made. Make a
> >place the transparency with multiple instances of your layout on the
> >covered with photoresist . Expose to UV, develop, etch, drill the holes
> >then cut the individual boards apart.
> I've read some sites about the process. Is there anyway to do it
> without having to deal with chemicals?
> The only one I've come across is this Techniks Peel and Press thingy
> but not sure how well it would work for my needs and *budget*
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup