The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Gary Glaenzer"
Subject: Re: Overvoltage Schematic Wanted
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
NNTP-Posting-Date: Sat, 14 Sep 2002 03:40:11 GMT
Organization: MediaCom High Speed Internet
Date: Sat, 14 Sep 2002 03:40:11 GMT
a whopping big 16 volt Zener diode comes to mind...............
"Joey @hotmail.com>" <"joeyga wrote in message
> I'm looking for an overvoltage schematic that meets the following
> criteria. If anyone
> has one I would appreciate a copy and be willing to pay any expense if
> My email is firstname.lastname@example.org
> 1. For a 12 volt circuit that would trip at about 16 volts
> 2. Does not use any relays
> 3. Has three wires to device, one + in, one ground, and one + out.
> 4. If the + in exceeds the set voltage then there is no output.
> 5. Input must be cut off and back on to reset
> Such a device is used on aircraft to cut off voltage to the alternator
> should it
> fail and normal voltage exceeded. I've seen the clam shell type and the
> type but never a schematic for the type I've mentioned above. ANY help
> will be greatly appreciated. Thanks.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup