The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Don K"
References: <email@example.com> <firstname.lastname@example.org> <3D8222E7.F121BEEA@texas.net> <email@example.com> <3D823F64.36514EE5@texas.net> <firstname.lastname@example.org>
Subject: Re: How to make/solder a circuit fast?
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
NNTP-Posting-Date: Sat, 14 Sep 2002 17:00:50 CDT
Organization: Giganews.Com - Premium News Outsourcing
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
Date: Sat, 14 Sep 2002 22:00:50 GMT
"N. Thornton" wrote in message
> Ultracheap PCBs:
> 1. a piece of very thin 1/8" wood. Skewer it with a needle to make
> holes, bend the leads over underneath to solder them together. Yes its
> crude, but it does work.
Thicker 1/8" wood will probably work too.
> 2. In fact for your circuit you could even go with a papier colle
> circuit board. Smear each sheet of newspaper with wallpaper paste, and
> press it onto the previous sheet, rolling it to squeeze out the goo.
> After several sheets youve got a sheet of stupidly cheap PCB. Put a
> weight on it to dry, so it dries flat. Again a sharp spike is all you
> need to 'drill' it.
Now that is a true multilayer *printed* circuit board!
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup