The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: firstname.lastname@example.org (Gary Lecomte)
Subject: Re: Overvoltage Schematic Wanted
Date: 15 Sep 2002 07:29:03 -0700
NNTP-Posting-Date: 15 Sep 2002 14:29:03 GMT
Joey <"joeyga"@hotmail.com> wrote in message news:<3D82A9C1.EA2CF8B6@hotmail.com>...
> I'm looking for an overvoltage schematic that meets the following
> criteria. If anyone
> has one I would appreciate a copy and be willing to pay any expense if
> My email is email@example.com
> 1. For a 12 volt circuit that would trip at about 16 volts
> 2. Does not use any relays
> 3. Has three wires to device, one + in, one ground, and one + out.
> 4. If the + in exceeds the set voltage then there is no output.
> 5. Input must be cut off and back on to reset
> Such a device is used on aircraft to cut off voltage to the alternator
> should it
> fail and normal voltage exceeded. I've seen the clam shell type and the
> type but never a schematic for the type I've mentioned above. ANY help
> will be greatly appreciated. Thanks.
Hi Joey, I am quite sure I could design something, all solid state
Mos-Fets as an output. But I would need to know the maximum current
through this device.
If interested, e-mail me.
Gary .......firstname.lastname@example.org "Put in the subject
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup