The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Max Foo
Subject: Re: American vs foreign electrical parts and installations
References: <3D84792C.15312F03@prontoREMOVETHISmail.com> <email@example.com>
X-Newsreader: Forte Agent 1.91/32.564
Date: Sun, 15 Sep 2002 16:47:34 GMT
NNTP-Posting-Date: Sun, 15 Sep 2002 16:47:34 GMT
With Power strips installed in every outlet... I never have pulled a
plug out directly from the box...so plastic is fine.
On Sun, 15 Sep 2002 15:05:43 GMT, "Nukie Poo" @verizon.net> wrote:
>"John Gilmer" wrote in message
>> The cheap switches very seldom cause ANY problem. Most of the few
>> problems come from the basic design (poke in backwiring) rather than
>> cheapness per se.
>> Cheap outlets are a tradeoff between reliability and cost. In new
>> construction there are quite a few wall outlets. Most outlets are almost
>> never used or have a lamp semi-permanently installed. Thus, there is
>> little justification for an upgrade.
>> Where there is heavy use, the cheap ones fail more often. Then it is up
>> the (home)owner to make his own cost/benefit calculation. If his outlet
>> failed after 5 years of use and a "good" outlet would have failed after 10
>> years of use (but who really knows) he might spring for the extra few
>> The last time I was at HD they were pushing a higher cost outlet that had
>> extra strong holding power of the plug so consumers get a choice.
>> For a homeowner doing a new room and a shoestring budget they money saved
>> using the cheaper outlets can add up.
>I agree. One thing is worth mentioning, though;
>Most residences are now wired using plastic outlet boxes. Often, if one
>installs a specification grade or hospital grade receptacle in such a box,
>the gripping power of the device will overwhelm the holding power of the
>6-32 tapped holes in the plastic box. The device winds up getting pulled out
>with the plug. That doesn't inspire customer confidence in workmanship. I
>have a builder who specs out Lev 5242 spec grade recepts on all his jobs. I
>use 3-1/2" steel gem boxes or 1900's with plaster rings on those jobs for
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup