The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: John Fields
Organization: Austin Instruments,Inc.
X-Mailer: Mozilla 4.01 [en] (Win95; U)
Subject: Re: How to make/solder a circuit fast?
References: <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <3D85221F.5D187DCE@texas.net> <firstname.lastname@example.org>
NNTP-Posting-Date: Mon, 16 Sep 2002 16:02:32 CDT
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
Date: Mon, 16 Sep 2002 21:02:32 GMT
The little lost angel wrote:
> On Mon, 16 Sep 2002 00:12:04 GMT, John Fields
> >Since we don't really know _what_ the motor driver looks like, there's
> >no telling what might happen if you throw another 60mA load across the
> >fan, so COUNT ME OUT!
> I didn't think 60mA would matter much to the PCB which is controlling
> two 0.23A to 0.3A fans... kinda like 10% more at most??
It might work fine, it might not. I can't tell without seeing the
driver circuitry. Is it proportional? Is it bang-bang? (Does the fan
run all the time on low (6V) until something in the PSU gets hot and
then it runs on high (12V) until things cool down again?) If you're
going to be putting 50 of these things together and there are other
folks who are going to be using them it would prob'ly be a good idea for
you to _know_ what effect that extra 60mA is going to have on the
Professional circuit designer
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup