The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: John Woodgate
Subject: Re: amplifiers high gain low current
Date: Tue, 17 Sep 2002 19:51:06 +0100
Organization: JMWA Electronics Consultancy
Reply-To: John Woodgate
NNTP-Posting-Date: Tue, 17 Sep 2002 20:38:41 +0000 (UTC)
X-Newsreader: Turnpike (32) Version 4.01 <5Z8C9wtxbnpWyFnyfFzqmVF739>
I read in sci.electronics.design that John Popelish
wrote (in <3D874DD5.C2262583@rica.net>) about 'amplifiers high gain low
current', on Tue, 17 Sep 2002:
>Samuel Kristanto wrote:
>> My name is Samuel, I have a problem with my final project.
>> I have a power supply that step up from battery 3V to 50V(10mA)--> I
>> use boost regulator from Mic2570-2BM.
>> Now I have to make an amplifier using the output from my soundcard to
>> the input of my amplifiers, I want to use maybe an OP-AMPS but its
>> very difficult to find the OP-AMPS that fit with 50V and need better
>> power than 500mW. Please help me to solve this amplifiers problem.
>> please reply me at : firstname.lastname@example.org
>> Thanks a lot
>> Samuel Kristanto
>High voltage opamps that draw less than 10 ma are available, but they
>may not be cheap.
True, but the system is crazy. Why convert 3 V to 50 V and then have to
find a HV op-amp, whereas conversion to 20 V or so would allow normal
op-amps to be used?
Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk
Interested in professional sound reinforcement and distribution? Then go to
PLEASE do NOT copy news posts to me by E-MAIL!
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup