The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Boris Nogoodnik"
References: <firstname.lastname@example.org> <email@example.com> <3D8222E7.F121BEEA@texas.net> <firstname.lastname@example.org> <3D823F64.36514EE5@texas.net> <email@example.com> <firstname.lastname@example.org>
Subject: Re: How to make/solder a circuit fast?
Organization: KGB, Ltd.
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
Date: Tue, 17 Sep 2002 17:53:18 -0400
NNTP-Posting-Date: Tue, 17 Sep 2002 17:53:17 EDT
"The little lost angel" wrote in message
> On Sat, 14 Sep 2002 04:52:50 -0400, "Boris Nogoodnik"
> >Specs are very conservative. Exceeding ambient temp by 10 degrees will not
> >your TO92 to melt. After all it's not a critical application. And you can
> >TO92 to a little piece of aluminum if you want. I've done that. And I took
> To which part of the To 92?
> I don't think aluminium foil would do right? :D
Don't laugh. It actually was like an aluminum foil, but real thick one. You
could still bend it with your fingers. Wrapped around with about 20x20 mm lip
sticking out on one side and glued to the case with some silicone.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup