The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Jim Yanik
Subject: Re: How to build your own Oscilloscope?
Date: Mon, 23 Sep 2002 01:07:14 +0000 (UTC)
Organization: Friends of Lummox
References: <0vcj9.172680$Jo.55878@rwcrnsc53> <firstname.lastname@example.org>
NNTP-Posting-Date: Mon, 23 Sep 2002 01:07:14 +0000 (UTC)
"laurence cope" wrote in
> thats easy
> if it's for audio a 20mhz dual beam analogue scope will do.
> if it's for rf then a 300mhz scope will fit the bill.
> if it's for digital signals or intermittent signal capture then it's
> got to be a digital the more the sample rate the better.
> I use a tektronix 2211 it's the best of both worlds it has a fairly
> high sample rate and a medium wide bandwidth, it's both analogue and
> digital on a crt and not tft.
> Best of all it only cost £300.
> I have also the latest digital 4 channel tek scope mega high sample
> rate, tft, floppy drive, printer port, ethernet and serial comms, all
> the biz, it's on loan however.
> Give me the 2211 anyday, it's far easier to drive, with the new tek it
> took ages to get round all the buttons.
> "The little lost angel" wrote
> in message news:email@example.com...
>> On 22 Sep 2002 11:20:19 -0700, firstname.lastname@example.org (Glenn Gundlach)
>> >Just looked at eBay. Tek 475 dc-250 mHz less than $100. If you have
>> >a computer, I bet you can afford $100. Tek 3012 DPO starts at $3000.
>> sorry to butt in but how does a newbie know if the oscope is working
>> or not? I want to get a scope but know next to nothing about chosing
>> one :D
There's a difference between "dual-beam" and dual-TRACE o'scopes.
A dual-BEAM scope has two separate electron guns generation 2 beams,and
each beam has it's own V deflection plates,sharing the H-deflection.
A dual-TRACE scope chops or alternates between channels,displaying on the
dual-beam scopes are fairly rare. TEK 7844 was a dual beam scope.
Jim Yanik,NRA member
remove X to contact me
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup