Subject: Re: does this fit in a 22V10 gal?
Date: Tue, 24 Sep 2002 00:51:07 +0100
References: <email@example.com> <firstname.lastname@example.org> <email@example.com>
NNTP-Posting-Host: modem-93-18-60-62.vip.uk.com (126.96.36.199)
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
"Frank Bemelman" wrote in message
> "markp" schreef in bericht
> > >
> > > Thanks for that, Mark. Saves me a bit of work ;) I still use some
> > > sort of old palasm to program my galchips, so the final equations
> > > are very helpful.
> > >
> > You're welcome Frank. Palasm eh? That's going back a bit! I would
> > getting the Lattice software though as it's free and easy to use, plus
> > you've got all those isp devices to target! Anyway, best of luck with
> > project.
> I made my 22V10 today, but changed it to sub 1, so that giving adress 1
> to the first module selects the 2nd, giving a 2 selects the 3rd and
> so on. A bit more intuitive that way. I also changed my pcb-layout,
> removed the 5 adress-jumpers I initially planned to use for selection.
> I tested the 22V10, and it behaves as expected. I'll think I'm ready
> to order my first set of prototypes now - but usually I wait a week
> to see if some other bright idea pops up, while not thinking about it ;)
Makes sense! Are you going to give us more of a clue as to what this kit
does (contract confidentiality permitting..)? Just curious!