The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Subject: Re: Lowest voltage drop diode
Date: Wed, 25 Sep 2002 03:35:02 +0100
NNTP-Posting-Host: modem-78-18-60-62.vip.uk.com (126.96.36.199)
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
"oguz" wrote in message
> I am looking for a very low voltage drop diode ( or equivalent circuit
> ) that has a forward voltage drop of 0.2 Volts or less. Maximum
> current to be conducted will be less than 5mA.
> Currently, I am using a BAT85 Schottky diode from Philips. This has a
> forward voltage drop of 0.3-0.4 Volts maximum. I have looked at some
> Germanium diodes that have a drop of 0.3 Volts.
> Is there a way to do this with a MOSFET or Transistor ?
> Is a one-way conducting device of 0.2 Volt drop or less achievable by
> any means ?
Is this for reverse voltage protection? If so you can use a P-channel
enhancement mode MOSFET wired 'backwards', i.e. gate to 0V, drain to +ve
supply and source to load.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup