The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Phil Allison"
References: <firstname.lastname@example.org> <email@example.com>
Subject: Re: IEC Mains lead. What fuse??
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
Date: Wed, 25 Sep 2002 18:21:15 +1000
NNTP-Posting-Date: Wed, 25 Sep 2002 18:10:00 EST
Organization: Telstra BigPond Internet Services (http://www.bigpond.com)
wrote in message news:firstname.lastname@example.org...
> On Wed, 25 Sep 2002 10:22:10 +1000, "Phil Allison"
> > ** I suggest you test the 10 amp lead with 11 amps (or even 13)
> >see how hot it gets. You may be surprised, there is a good margin of
> >in the ratings used for cable.
> I'm sure there is a great deal of margin in *most* cables/connectors
> and indeed *most* could survive 13A quite happily. What worries me is
> those few that don't have such a generous safety margin.
** The pure copper cross-section for a 10 amp marked rating on a
mains lead is standardised and subject to compulsory law. It is 1 sq mm
everywhere in the civilised world AFAIK. Do you have other information??
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup