Subject: Re: Slide pot with switch?
X-Newsreader: Forte Agent 1.91/32.564
Date: Thu, 26 Sep 2002 22:51:38 GMT
NNTP-Posting-Date: Thu, 26 Sep 2002 17:51:38 CDT
Organization: Road Runner - Texas
I went to their website and downloaded the information on their faders. I now have ideas on how to incorporate a simple
leaf switch which I can fabricate and modify to fit a standard slide pot!! Thanks a million!
wavefront@SPAMbigfoot.com (Martin Griffith) wrote:
">"On Thu, 26 Sep 2002 05:05:35 GMT, JP scribbled:
">">I'm looking for a 1K, .25W (or larger) slide pot, Linear Taper preferred, + - 30MM travel, with a 1/2 A (or larger)
">">switch SPST or DT, integrated within it. If you just know of a source for slide pots with switches or have seen
">">before, that would be helpful! Better yet would be a switch made for slide pots like the kinds that fit on to
">">pots. I've tried Mouser and Digikey (they have the slide pots, but none with switches) and have asked around
">">no one has even heard of one. Right now I'm using a slide pot with a sub-mini micro switch with a roller actuator
">">degrees to the slide lever. Any ideas on how to make it slimmer, to fit the width of the slide pot would be
">">appreciated. Also, the switch has to be above the slide pot body so the roller can hit the pot's lever in the home
">">position. The switch just needs C & NC connections, it breaks when the slide pot is in the home (off) position).
">"The obvious place to look is Penny and Giles, but hope youve got a BIG
">"What's the difference between a soprano and a terrorist?
">"You can negotiate with a terrorist.