The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Ken Smith
Subject: Re: Magnetically Shielded Inductors
Date: Fri, 27 Sep 2002 14:49:34 +0000 (UTC)
Organization: a2i network
NNTP-Posting-Date: Fri, 27 Sep 2002 14:49:34 +0000 (UTC)
In article ,
Bill Sloman wrote:
>Toroids should be better. A toroidal coil has no external magnetic field,
>even if you leave out the toroidal core. Real toroidal coils are rarely
>perfectly uniform toroids so there is usually some external magnetic field,
>but not a lot.
Even a perfectly uniformly wound single layer toroid will have the an
external field. If you hold the toroid so that you are looking through
the hole and observe where the wire goes, you will see that there is one
turn the size of the toroid. This can be removed by making it a 2 layer
toroid with the second layer progressing along the core in the other
I have also found that EFD cores have fairly low external field.
firstname.lastname@example.org forging knowledge
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup