The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Duane Bozarth
Subject: Re: 125 or 250V fuse?
Date: Fri, 27 Sep 2002 17:06:09 -0500
Organization: Posted via Supernews, http://www.supernews.com
X-Mailer: Mozilla 4.77 [en] (Win95; U)
References: <firstname.lastname@example.org> <email@example.com> <6c3l9.49259$5M3.firstname.lastname@example.org>
I've got to side w/Sam here...IMV there's no point of responding if it's
just a guess. (Although at least admitting it is more than many
do...and better than asserting allknowingly incorrect
information.) The response "take it for what it's worth" and "it's up
to OP to decide that" is also worthless. But, doesn't excuse OP from
not going to faq first, either...
And I'll note Sam's zinged me on occasion also when I've been
remiss/flippant/an ass myself...
> Sam's renowned expertise, devotion and staggering amount of spare time is
> not questioned here. His bedside manners may, however, sometimes be a little
> rough on the edges. Having said that, I sometimes get the feeling that Mr
> Goldwasser runs out of patience after answering the same basic/trivial
> questions for zillions of years and that his replies can be misconstrued,
> for they are always very to-the-point.
> For having been at the receiving end of his commentary on a few occasions, I
> speak from experience. I may add that I would never have answered back, out
> of respect for his generosity.
> Being published in Poptronics or its predecessors does not preclude a little
> courtesy for newbies.
> "Leonard G. Caillouet" a écrit dans le message de
> news: 6c3l9.49259$5M3.email@example.com...
> > Considering that Sam has spent countless hours on the FAQ for this group,
> > would galdly cut him some slack for being an ass occasionally, though I
> > didn't think his comment was out of line. I certainly don't answer posts
> > when people are too lazy to just search the FAQ and many other informative
> > references that can be found online. If I'm not mistaken there is some
> > on fuse voltage ratings there.
> > Sam, many of us really appreciate the effort that you put in to respond to
> > so many posts and have learned a lot from your FAQ.
> > Leonard G. Caillouet
> > Service Manager
> > Electronics World
> > Gainesville, FL
> > 352-332-5608
> > 352-332-5668 (fax)
> > "Sam Goldwasser" wrote in message
> > news:firstname.lastname@example.org...
> > > "jeff legere" writes:
> > >
> > > > The not so polite reply:
> > > > Don't be an ass. I said it was a guess, take it as such and keep your
> > > > comments to yourself.
> > >
> > > I should do this because??? :)
> > >
> > > > The polite question:
> > > > as to voltage interuption, are you talking about spark gap? as in the
> > length
> > > > of the gap created when the fuse blows prevents a spark from one end
> > the
> > > > other?
> > >
> > > Yes, and the composition of the fuse element as well as the material
> > surrounding
> > > it (e.g., air or sand).
> > >
> > > --- sam | Sci.Electronics.Repair FAQ Home Page:
> > > Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
> > > +Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
> > > | Mirror Site Info:
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup