The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Roger Johansson
Subject: Re: How to make/solder a circuit fast?
Date: Sun, 29 Sep 2002 09:42:20 +0200
References: <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
NNTP-Posting-Host: dialup2-3-2.home.se (220.127.116.11)
X-Newsreader: Forte Agent 1.8/32.553
email@example.com (N. Thornton) wrote:
>Because my Fluke measures it correctly. A 5A current
>reads out 5.x mV on the Fluke. I get anything from 20mV to 40mV on
>cheapo ones. I need like 3~4 of them for current readings, and 4
>Flukes would really kill my budget.
I cannot understand why you need to measure these 4 points
simultaneously, you will not be able to look at more than one volmeter
at a time anyway.
Why can't you just move the probe and look at one point at a time?
If you need to measure at different currents you will just have to
repeat the measurements at every current level.
Maybe you could explain in more detail what you are trying to do.
There is probably a simpler way to do it than to buy 4 Fluke's.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup