The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Tarver Engineering"
References: <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <_F1l9.30$VI5.firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
Subject: Re: (Avionics) How can this circuit produce an "inductive surge"?
Date: Sun, 29 Sep 2002 19:41:17 -0700
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
"Peter Gottlieb" wrote in message
> "Tarver Engineering" wrote in message
> > > >
> > > > You do know that floresent ligting is far harder on an UPS than an
> > induction
> > > > motor, do you not?
> > > >
> > >
> > > So what? These are all 4 quadrant units. I use fl lighting on a UPS
> > > emergency lighting, much more efficient than incandescent. I didn't
> > the
> > > series motor was the *only* test, did I?
> > Well really, we were running big motor generator sets, to make 400
> > (or 408 HZ IBM), off UPS 20 years ago. Running a motor with an UPS is
> > hardly an accomplishment.
> > To make the any load claim you would have to be able to drive all
> > lights.
> Why would you run a static inverter to make one frequency of AC then use a
> MG set to convert to another frequency?
> Seems like a real kludge to me,
> not to mention, a very noisy setup.
No, it was the only game in town.
> You must not have been torturing with the correct motors. A series wound
> AC-DC motor with its brushes is much nastier than flourescent or HID
> lighting. "You do know that, do you not?" Try it, but watch the
> MOVs and FETs!
You are mistaken.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup