References: <%_wk9.52964$1C2.email@example.com> <3D9442F1.42F2FBAF@webaccess.net> <3D9467AC.9745AC66@webaccess.net> <8a%k9.56338$1C2.firstname.lastname@example.org>
Subject: Re: Any ideas on measuring radiation in the home ?
X-Newsreader: Microsoft Outlook Express 5.00.2919.6700
Date: Mon, 30 Sep 2002 16:22:08 GMT
NNTP-Posting-Date: Mon, 30 Sep 2002 16:22:08 GMT
Organization: AT&T Worldnet
Thanks for the reply. Yes, I do find sparking even on disconnecting the
computer after switching it off. I had also disconnected almost everything
else that is on-line. One poster mentioned that the sparking is due to power
line filter capacitance (in the case of the microwave oven).
To add to my postings so far, I continue to notice unnatural heating in my
home at night. For example last night the temperature was 69 deg F in the
area where I slept whereas it was 59 deg F outside (no internal source of
heat). When I moved to a different location, the previous location dropped
to 64 deg F and the new location rose to 67 deg F while the outside remained
at 59 deg F. This heating cannot be explained by body heat or even normal
fridge operation, I think.
To respond to some of the other posters' concerns : I am not paranoid, etc.
Some of the posters have gone off the deep end in that direction. Not to
worry; I still have my senses. Just checking to see what this newsgroup can
come up with in the positive direction and hoping I won't get bogged down
with too many negative people.
"milne_v" wrote in message
> Check the homes wiring system for ground or plumbing currents making
> sure that any inductive type appliances are not operating at the time.
> The ground system should not show much signal using a scope. If there
> are spiked transients on the grounding system while appliances are
> shut off then you can assume that something is causing them which is
> not associated with the normal operation of the homes electrical
> system. Finding the source is another story. Should such transients
> exist then they may also produce broadband AM radio interferance in
> the vicinity. Make sure that items such as triac dimmer swithches etc
> are also not operating. Ground currents and switching transients have
> been suspected as a cause of problems in rural areas in the past,
> there's no reason why they can't be a problem elsewhere. These types
> problems are generally the responsibility of the hydro provider.
> Getting them to inspect and correct may somewhat of a different
> "News2020" wrote in message
> > I forgot to add: it can maim, paralyze or kill you too (stroke, seizure,
> > heart attack/arrhythmia) depending upon how much intrigue is involved.
> > in that case, there will be no proof or evidence readily available. If
> > have worked with these things, and yet choose to belittle the hazards
> > involved in misuse, your judgement is in question, not mine. I was
> > indicating the possibility of danger (if misused) which is widely
> > and well known.
> > A person who downplays the hazards or denies the hazards of mis-use of
> > equipment or gizmos is raising a serious question of honesty (or even
> > competence to be given responsibility), I think.
> > "News2020" wrote in message
> > news:8a%k9.56338$1C2.email@example.com...
> > >
> > > < Thanks for the inputs so far and the circuit diagram, etc; I am
> > to
> > > ignore the attacks and negativity.>
> > >
> > > I am not really 'worried' about this spark. The question was more
> > > There is potential for a LOT of 'mischief' in this area of expertise.
> > > you will never have evidence to show. The damage will be
> > Such
> > > as tones that match with brain frequencies and drive you nuts, reading
> > > brainwaves by thermal imaging, using imaging feedback to pump in
> > controlling
> > > brainwaves, small cancers in blood vessels, muscles, skin, brain,
> > > cells, etc, a little burnt skin layers, some damage to the eyesight,
> > > cataracts over a long period, unnoticeable loss of hearing, clots
> > the
> > > skin that eventually get infected and turn into cancers, etc..., use
> > > power lines and home sheet metal fixtures and appliances to inject
> > > high-energy' microwaves, etc. And I am not talking product design
> > > such as the shoe measuring device or monitors that one poster has
> > mentioned.
> > > I am talking deliberate, planned, secret people who could do such
> > No
> > > one would know. No evidence unless you get the right measuring
> > The
> > > only question is, is it within the limits of the technology today. If
> > > answer is yes, the devil is not very far. This kind of stuff has been
> > around
> > > for quite some time. It is only a matter of further refinement and
> > > miniaturization and deployment, target/victim selection, etc.
> > >