The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "R. Lewis"
Subject: Re: What is maximum current for LED?
Date: Thu, 3 Oct 2002 21:12:49 +0100
Organization: Nextra UK
NNTP-Posting-Date: Thu, 3 Oct 2002 20:15:34 +0000 (UTC)
X-Newsreader: Microsoft Outlook Express 5.50.4133.2400
"markp" wrote in message
> "John Woodgate" wrote in message
> > I read in sci.electronics.design that Nelson Win
> > wrote (in > .google.com>) about 'What is maximum current for LED?', on Wed, 2 Oct
> > 2002:
> > >I bought a few high brightness 3mm LEDs (various colors: R,G,B,W) and
> > >the specs mention a forward current (If) of 20mA and peak current (If
> > >(peak)) of 100mA (160mA for red). The specs don't say anything about
> > >the current beyond that, nor what the recommended maximum current
> > >should be. There's not even a brand name on the LEDs so I can
> > >approach the manufacturer. I want to squeeze the brightest light I
> > >can from the LEDs without prematurely burning them out. Does anyone
> > >have any experience here to recommend a maximum current? The LEDs will
> > >flash on and off at a frequency of a few hertz, 50% DC, for a duration
> > >of a couple or hours at a time. Any advice appreciated.
> > >
> > Beyond 20 mA continuous you won't get significantly more light. But at
> > 50 % duty-cycle, you need to go to 40 mA to produce the same visible AND
> > (more important) no excessive heating effect.
> > --
> > Regards, John Woodgate, OOO - Own Opinions Only.
> > you need to go to 40 mA to produce the same visible
> Not strictly true John, the eye has significant persistence (or rather the
> brain has) and tends to 'remember' the peak light output. You may find
> or even less at 50% duty cycle of a few hundred Hertz will give a
> brightness equal to the 20mA continuous. Generally PWMing can decrease
> overall power dissipation for this reason.
I think this is the urban myth that sticks around because different people
concoct different pseudo scientific reasons for it being true - and if
enough people say it... it must be true.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup