The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: James Meyer
Subject: Re: Max1676 chip giving me a real rough time with low efficiency
References: <email@example.com> <firstname.lastname@example.org>
X-Newsreader: Forte Agent 1.91/32.564
Date: Sun, 06 Oct 2002 04:34:42 GMT
NNTP-Posting-Date: Sun, 06 Oct 2002 00:34:42 EDT
On 5 Oct 2002 05:59:54 -0700, email@example.com (Handy) wrote:
>I am following up on my own message thread as I have I think that I
>have a real problem with the layout for the MAX1676.
>Is there anyone who has made a successful pcb layout using this chip,
>I would some hints. I have the layout for the evaluation kit but have
>no idea how good this would be so I am looking for a few more
>Thank you in advance
Although I have never worked with that particular eval kit, I have
worked for Maxim. I would trust their PC board layout 100%. In most cases the
designer of the chip its self is responsible for the design and operation of the
eval board for "his" chip. He's also not the only one at Maxim who takes a very
close look at the operation of the eval circuits.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup