From: "News2020"
Newsgroups: sci.electronics.design
References: <3DA05E20.4B6BA597@webaccess.net>
Subject: Re: Why is the home voltage so high ?
X-Newsreader: Microsoft Outlook Express 5.00.2919.6700
Message-ID:
Date: Sun, 06 Oct 2002 19:21:50 GMT
NNTP-Posting-Host: 12.81.2.5
NNTP-Posting-Date: Sun, 06 Oct 2002 19:21:50 GMT
Organization: AT&T Worldnet
This 'industry' needs some light and exposure to bring it out of
darkness/decay.
"Chuck Simmons" wrote in message
news:3DA05E20.4B6BA597@webaccess.net...
> John Woodgate wrote:
> >
> > I read in sci.electronics.design that News2020 wrote
> > (in ) about
> > 'Why is the home voltage so high ?', on Sat, 5 Oct 2002:
> > >
> > >I have re-inspected the walls this morning. < I am carrying over some
of the
> > >comments from the previous thread on " Re: Any ideas on measuring
radiation
> > >in the home ? " ; both the threads seem to be converging to the same
> > >problem - and it is not a voltage problem ! >
> > >
> > >All the noise is now gone ! The recessed lights do seem to show some
> > >directional reception nulls (lobes) - but it is nowhere like last night
! It
> > >shows much milder variation directionally. But, even the mains panel,
the
> > >fire-sprinkler pipe in the basement, etc. - all are clear of noise now
! I
> > >checked every point that showed distinct grainy noise yesterday.
> > >
> > This is a quite normal effect: radio noise levels are often much higher
> > after dark than in daylight. Furthermore, you were measuring on Saturday
> > morning, when far less noise is being injected into the system by
> > industry.
>
> You really shouldn't confuse the issue with facts.
>
> Chuck
> --
> ... The times have been,
> That, when the brains were out,
> the man would die. ... Macbeth
> Chuck Simmons chrlsim@webaccess.net