The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Daniel M"
Subject: Re: Buzzer/Inductor question
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
Date: Tue, 08 Oct 2002 01:47:03 GMT
NNTP-Posting-Date: Mon, 07 Oct 2002 18:47:03 PDT
Organization: EarthLink Inc. -- http://www.EarthLink.net
Sorry, I was mistaken in the values. Yes this is how it is hooked up, but
instead of a 10uf cap it is a 10nf (.01uf).
It was in the documentation on the web but the processor is End Of Life and
the documentation is not on the web anymore. I have requested another copy
from the MFG.
Ok so with the new value, any theories?? Thanks.
"Tom Faloon" wrote in message
> You are right. This circuit does not make sense.
> The 10uF to Vcc would kill any signal fed through the 0.1uF.
> Is the circuit given in a document which is available on the web ?
> Tom Faloon
> Daniel M wrote in message
> > I have a question about a buzzer circuit i am working on. I have a CPU
> > has a buzzer output to drive a simple buzzer. I dont understand the
> > circuit and wanted to know if someone can explain it....
> > It runs from the CPU output, through a .1uf cap to a buzzer/inductor.
> > other side of the buzzer is tied to ground. The buzzer side of the cap
> > 10k pulldown to ground and a 10uf cap to VCC.
> > Ok i can possibly see the series cap and pulldown being sometime of RC
> > filter for the buzzer but the cap to VCC has got me stumpped. Am i wrong
> > this? what is the other cap for? any explinations? Thanks.
> > Daniel.
> > firstname.lastname@example.org
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup