The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Reply-To: "Kevin Aylward"
From: "Kevin Aylward"
References: <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
Subject: Re: Problems with Electronics Workbench - timestep errors
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
Date: Wed, 9 Oct 2002 13:03:14 +0100
NNTP-Posting-Date: Wed, 09 Oct 2002 13:03:19 BST
"Ban" wrote in message
> "The little lost angel"
> Newsbeitrag news:email@example.com...
> >I downloaded SuperSpice and attempt to make a beginner's comparison
> >with the other I used (I think it's Edison).
> a really easy program to use is SiMetrix Intro by
> I use it with my digital colleague and he immediately could work with
I have the demo of this. Again its non-standard Windows operation. You
can't double-click on a component to get its properties. Its Windowing
system is decidedly non Windows, it is messy with so many indepandant
floating windows, imo. One thing I found strange was the default
component colour. Its red. I am conditioned that red is for selected
Double-clicking on the schematic gets you into wire mode. I don't like
at all. In SS it pops up page, draw etc dialog set-ups. Additionally you
cant get out of wire mode using ESC. This bit is really annoying. In
fact, you have to click twice on the draw button to get out of draw
mode. ESC should *always* be able to reset yourself. Little details like
this, make it unusable for me anyway.
SuperSpice, a very affordable Mixed-Mode
Windows Simulator with Schematic Capture,
Waveform Display, FFT's and Filter Design.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup