The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
References: <email@example.com> <firstname.lastname@example.org> <email@example.com>
Subject: Re: Problems with Electronics Workbench - timestep errors
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
Date: Wed, 09 Oct 2002 14:44:06 GMT
NNTP-Posting-Date: Wed, 09 Oct 2002 16:44:06 MET DST
"Kevin Aylward" schrieb im Newsbeitrag
>> > Angel,
> > a really easy program to use is SiMetrix Intro by
> > I use it with my digital colleague and he immediately could work with
> I have the demo of this. Again its non-standard Windows operation. You
> can't double-click on a component to get its properties. Its Windowing
> system is decidedly non Windows, it is messy with so many indepandant
> floating windows, imo. One thing I found strange was the default
> component colour. Its red. I am conditioned that red is for selected
> Double-clicking on the schematic gets you into wire mode. I don't like
> at all. In SS it pops up page, draw etc dialog set-ups. Additionally you
> cant get out of wire mode using ESC. This bit is really annoying. In
> fact, you have to click twice on the draw button to get out of draw
> mode. ESC should *always* be able to reset yourself. Little details like
> this, make it unusable for me anyway.
> Kevin Aylward
Kevin, the wire starts with a middle button single click and ends with a
left click, if there is a captured connection. You have to use the right
click to end it anywhere. Always the middle button ends a segment.
What I like are the "Laplace Transfer Function" box where you can directly
enter the theoretical transfer function and compare it with the real part
simulation. For filter design quite useful.
What is annoying is to place a Terminal for noise analysis.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup