From: email@example.com (Allan Herriman)
Subject: Re: Twisted Pair High Data Rate Design
Date: Sun, 13 Oct 2002 06:12:47 GMT
Organization: Agilent Technologies
NNTP-Posting-Date: Sun, 13 Oct 2002 06:12:16 +0000 (UTC)
X-Newsreader: Forte Free Agent 1.21/32.243
X-Cache: nntpcache 2.3.3 (see http://www.nntpcache.org/)
On Sat, 12 Oct 2002 18:04:17 +0000 (UTC), "Justin Farrelly"
>Needs to be very low power balanced transmission. Distance 50M to 100M
>reliable, occupied data rate will be about 12Mbits/sec if synchronous, about
>15Mbits/sec async. It does not need to support a lot of the Ethernet
>protocol overhead, being used to transmit real time data from high bit rate
>sensor. Current approaches are discrete, but I am looking for a packaged
>TX/RX soloution to avoid another fully discreet design. Most current high
>rate stuff (100M, etc) gulps power quicker than we can supply it!
With a high enough voltage, you can supply several watts using phantom
power over the same twisted pair. An Ethernet transceiver doesn't use
anything like that amount of power. You can also get standalone
Ethernet PHY chips, so you don't need to deal with "protocol
>"Mike" wrote in message
>> "Justin Farrelly" wrote in message
>> > If anyone knows of a company or design engineer (professional) with
>> > experience in syncronous data over twisted pair at rates exceeding
>> > please let me know or point me in the right direction... much
>> There are companies currently working on 10Gb/s over CAT-5 twisted pair.
>> Times just published an article about some of the companies that are
>> on it:
>> This seems like overkill if you're simply looking to exceed 15MB/s, but
>> something like 100Mb/s Ethernet doesn't, and almost everyone does that.
>> you doing something special, that won't work with Ethernet? Is your speed
>> 15Mbits/s, or 15Mbytes/sec?
>> -- Mike --