The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Frank Bemelman"
Subject: Re: My flyback experiment is on the web
Date: Mon, 14 Oct 2002 19:23:07 +0200
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Organization: EuroNet Internet
NNTP-Posting-Date: 14 Oct 2002 17:24:07 GMT
"Chris Carlen" schreef in bericht
> Hi folks:
> Here is the URL to my web page showing the results of my most recent
> experiments with a flyback converter. I still haven't gotten a PWM chip
> hooked up yet, as my first goal was to buy some inductors that look like
> they are designed for switching supplies, and see if they'd work better
> than the hand wound transformer I made from a PC power supply core.
> Actually, the inductor seems a bit worse :-(
> All the details are on the web page.
> My main question is why does the inductor get so warm? I figured I
> wasn't really pushing it too hard, so it shouldn't loose much power.
> but it seems most of my losses are occurring in the inductor. I was
> hoping to avoid complex topologies such as a two transistor flyback,
> which requires a transformer, but lends itself to easily shunting the
> remaining core energy back to the input rail. Can that be done with the
> simple flyback that I am working with? I figured I could get 75% or
> better, so I'm not really far off. But I don't like heating the
> inductor, and I want to push up the power another 25% from what I'm
> testing at before I finish.
> I have a smaller inductor, and a larger one too, but all of the toroidal
> type, designed for 150kHz switchers.
> Comments appreciated on what steps I might take to make this simple
> circuit move in the direction of something worth committing to FR-4.
> I will put more on the web page when I get to testing out the PWM chips,
Just a question to thicken the plot: is your 1 ohm current sense resistor
wirewound, and does it have an inductance too ?
(remove 'x' & .invalid when sending email)
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup