The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: The Technical Manager
Subject: Re: Microstrip T junctions
Date: Sun, 27 Oct 2002 11:17:15 +0000
Organization: Microwave Department
References: <3DB59303.87749D3D@niobiumfive.co.uk> <3DB6ED77.D4147402@niobiumfive.co.uk>
NNTP-Posting-Date: 27 Oct 2002 11:17:16 GMT
X-Mailer: Mozilla 4.78 [en] (X11; U; SunOS 5.7 sun4u)
Dan Marquez wrote:
> Hello. You might prefer to type "microstrip software" in the search engines
> and see if there is a software you like. In case there are errors in your
> calculations, you should always add pads around the transmission lines so
> you can add (gap-weld) transmission stubs. Stubs are great for matching
> mismatched impedances.
I have access to EM simulators like Sonnet and HP ADS but was wondering if
anyone has analysed and modelled microstrip T junctions before to the level
that I am interested in.
There are a few articles around about tips to improve T junctions like forming
a slot or vee opposite the branch line or even increasing and decreasing
conductor widths prior to entering the T junction itself but nothing dealing
with what I am interested in.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup