The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Spehro Pefhany"
Subject: Re: Reference Junction for Thermocouple
User-Agent: tin/pre-1.4-19990216 ("Styrofoam") (UNIX) (Linux/2.2.14 (i586))
Date: Tue, 29 Oct 2002 15:36:04 GMT
NNTP-Posting-Date: Tue, 29 Oct 2002 10:36:04 EST
The renowned Al wrote:
> I would like to build a solid state reference junction for my
> thermocouples. I know it's been done many times, so I don't want to
> "reinvent the wheel." Anyonel have a schematic handy?
Many low end instruments use a linear approximation, and you've already
been given a schematic for a simple one. If you want to get
fancy you can simulate the thermocouple nonlinearity and make an accurate
"it's the network..." "The Journey is the reward"
firstname.lastname@example.org Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup