The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
NNTP-Posting-Date: Tue, 29 Oct 2002 23:02:22 -0600
From: "David Jones"
Subject: Re: how to tell when forward bias?
Date: Tue, 29 Oct 2002 23:58:21 -0500
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
its unitelligable because I wrote it in a bigger area than it is viewed
"Bob Wilson" wrote in message
> In article , email@example.com
> >lets say theres a circuit like the following
> > ----------10k resistor-----------(gate to SCR) -------800ohm
> > | |
> >anode-(SCR)-cathode -------------------------(-)
> >lets say there is a -9 voltage on the right. wouldn't that make the SCR
> >gate negative? I've been told it makes it positive. and why would it be
> >positive? the gate is connected to both the positive and negative leads.
> >one person told me that the gate needs to be positive relative to the
> >cathode. well wouldn't that be true even if you disconnected the
> >lead from the gate of the SCR because the 800ohm resisitor would make the
> >voltage to the gate drop below the voltage of the cathode. That means it
> >would be positive right? I am totally and utterly confused here. I can't
> >understand even the simplest circuits well because of this junk. could
> >someone tell me a fool proof way to think of circuits like this,
> >transistors and such, so that I can't possibly get confused?
> >thanks. david
> You need to do a better job at ASCII art. Your "circuit" is
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup