The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Ken Taylor"
Subject: Re: Need schematic for digital timer (Help)
Date: Thu, 31 Oct 2002 13:57:06 +1300
NNTP-Posting-Host: 219-88-64-2.adsl.xtra.co.nz (18.104.22.168)
X-Newsreader: Microsoft Outlook Express 6.00.2720.3000
"Just outa Time" wrote in message
> I'm a student in electronics technology and need to come up with a
> schematic/parts list for a timer project. I am totally lost. The
> timer characteristics will need to be:
> * Counts to 10 minutes, displaying an illuminated LED at the end of
> each minute.
> * Has a reset that can be activated anytime, starting the count
> sequence again.
> * Has an audible alarm at the end of the 10 minute elapsed time.
> * Operates from 12-15 vdc power source
> Our textbook only discusses the use of gates / 555 timers / D
> flip-flops in terms of generalities and offers no specific design
> information. There isn't time to order a book. I was thinking of the
> TTL Cookbook or some such title, but the project is due soon. Does
> anyone have a schematic that could be adapted to produce this timer?
> Thanks much! Justin
Since you have info on the 555, take a look at
for TTL data sheets. A search on "555 timer" will give you any extra info
you need to get one of those beasts going, then the rest is conceptually
trivial, as they say.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup