The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "N. Coesel"
Subject: Re: Simple ISA design to simple PCI design?
Date: Mon, 4 Nov 2002 10:09:36 +0100
Organization: Planet Internet
References: <01c28289$efecd000$LocalHost@default> <3DC56B5B.firstname.lastname@example.org> <email@example.com>
NNTP-Posting-Date: 4 Nov 2002 09:11:04 GMT
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
"Mike Harding" wrote in message
> On Sun, 3 Nov 2002 20:56:27 +0100, "N. Coesel" wrote:
> >"Rene Tschaggelar" wrote in message
> >> You should forget a PCI solution not for the hardware,
> >> the hardware is doable, but for the software. Who is
> >> going to write the driver ?
> >You don't really need a driver to access a card, especially if it's a
> >project or a test-setup. If you know the address, you can do direct port
> >I/O. That's how I test my FPGA PCI designs (with a PCI core).
> That will work in W98 and earlier but not in XP, W2000 and the like.
It will work in XP and W2000 as well. Look for a program called PCI-tree; it
does nothing but reading and writing directly to memory and I/O addresses.
AFAIK there is a DLL in windows that allows you to do this for debugging
Reply to: nico nctdev nl @ .
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup