The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: email@example.com (N. Thornton)
Subject: Re: household electrical failiure
Date: 4 Nov 2002 07:12:00 -0800
References: <3DC5D45D.C98DDD80@mfi.net> <firstname.lastname@example.org>
NNTP-Posting-Date: 4 Nov 2002 15:12:00 GMT
email@example.comUrPants (Take off UrPants to reply) wrote in message news:<firstname.lastname@example.org>...
> Thanks for your reply,
> I appreciate everyone's concern that I not injure myself or my family members.
> I'm perfectly capable of restoring the outlet to the exact configuration it had
> previous to this problem. I understand that there is always a danger
> electrocution in the bathroom for or any socket. This particular one was not
> near any place that someone would immerse themselves and it had a 20 amp
> circuit breaker in the garage. I was just trying to diagnose with the problem
> was. I think the contractor or electrician that installed the socket did not
> take into account that most of them wiring in the Annex was hooked up through
> it. I literally do not have the money to hire electrician. If you folks feel
> it is necessary I will go to the library and read some books on wiring, but my
> knowledge of physics is very good and I have self taught many other difficult
> subjects without any problems including ones that involved some risk.
> Right now I simply want to find a break in the neutral wiring and splice it. I
> intend to use wire nuts rated for heavy loads and a length of wire certified
> for at least 20 amp's. If you folks see there is being any danger in a simple
> operation like this I'm open to your recommendations, but I'd rather not be
> lectured about getting electrician that is just not an option. If you feel any
> to call me stupid go-ahead I have nothing to prove to myself. I would welcome
> any useful information you guys can convey.
> Thank you,
> Direct replies to: Michachik@aol.com appreciated
Each time you tell us you know what youre doing, and each time what
you say demonstrates that you dont understand the safety issues, and
are doing things that endanger peoples' lives. You dont appear to
A bathroom socket not being in reach of a water outlet does NOT make
it safe to use a non GFCI protected outlet. Not in any way. Wet people
dont have to be immersed to die. And replacing the socket is not a way
to diagnose the problem anyway.
If you are going to go ahead anyway due to lack of money, I can
understand that, but I for one don't want any involvement in that.
Someone else might decide to tell you how to find your open neutral,
not me. I think you should be concentrating on how to get the money to
pay for an electrician.
Meanwhile I'm thinking about nominating you for a Darwin award.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup