The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Subject: Re: !! Software to suggest parallel resistor values.
Organization: The Armory
X-Newsreader: trn 4.0-test69 (20 September 1998)
From: firstname.lastname@example.org (Richard Steven Walz)
Date: 08 Nov 2002 17:08:24 GMT
In article ,
Terry Pinnell wrote:
>email@example.com (adrian) wrote:
>>Does anybody know of any software that can recommend two parallel
>>resistors values for a desired value eg 9.812 K 1/4 Watt 1 percent
>I occasionally use a neat little program called Resistor CAD, written
>by Terry Harris of Vader Systems. It suggests parallel or series
>values, and also has a voltage divider calculator. I got it some years
>ago from http://dspace.dial.pipex.com/terry.harris/ but on checking I
>see that's no longer a valid site. Nor did an initial google on
>"resistor CAD" locate it.
>As its author gave it free distribution status, I'll post the 277 KB
>RESCAD.EXE in alt.binaries.schematics.electronic, together with its
>README file (renamed by me as RESCADREADME.TXT).
>Hobbyist, West Sussex, UK
It's up on my site, both zipped into this one:
-Steve Walz firstname.lastname@example.org ftp://ftp.armory.com/pub/user/rstevew
Electronics Site!! 1000's of Files and Dirs!! With Schematics Galore!!
http://www.armory.com/~rstevew or http://www.armory.com/~rstevew/Public
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup