From: "John Jardine"
Subject: Re: want a list of R value E6 E12 E24 E48 E96
Date: Fri, 8 Nov 2002 22:04:59 -0000
NNTP-Posting-Date: 8 Nov 2002 21:54:03 GMT
X-Newsreader: Microsoft Outlook Express 5.00.2615.200
Spehro Pefhany wrote in message
> On Sat, 09 Nov 2002 02:09:27 +0700, the renowned "Nucharin W. Jansen"
> >Where to get a list of resister value ?
> >I would like to implyment into my sofware resister matching.
> Any catalog. For example: http://www.digikey.com
> You only need to enter in a single decade of values, of course.
> You can do it algorithmically for 1% (E-96) values, IIRC, but 5% and
> 10% values don't exactly follow the equation. Anyway, it's not going
> to take you long to just enter in the table(s) you need.
> Oh, heck, here's an E-96 series that I block copied from this web
> page: http://www.logwell.com/tech/components/resistor_values.html
> and edited a bit. Verify the values before using it for anything
> important, errors may have crept in from editing or may be in the
> original page
> Best regards,
> Spehro Pefhany
> "it's the network..." "The Journey is the reward"
> firstname.lastname@example.org Info for manufacturers:
> Embedded software/hardware/analog Info for designers:
I Can't see a "300" in there?. The table seems to be an E80 series?.
From E24 on ...
Why can't they make some ** really useful** values like
400,500,600,700,800,900 instead of slavishly keeping to that 'log increment'
formulae. Great for always finding something that will fit *after* a design
Useless for calculating or designing anything 'up-front' such as ratio
How many people honestly prefer to use a 49.9k resistor to say a 50k