The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: email@example.com (Nico Coesel)
Subject: Re: Searching for schematic software
Date: Sun, 10 Nov 2002 11:46:47 GMT
References: <3DCD29BB.firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
NNTP-Posting-Date: 10 Nov 2002 11:48:08 GMT
X-Newsreader: Forte Free Agent 1.21/32.243
shb*NO*SPAMemail@example.com (Si Ballenger) wrote:
>On Sat, 09 Nov 2002 16:49:55 GMT, firstname.lastname@example.org (Nico Coesel)
>>Jason Tang wrote:
>>>> Greetings, Folks - I teach electronics at a Vo-Tech center and am
>>>> updating all my tests and handouts. I am searching for a simple
>>>> schematic drawing software package that will allow me to draw simple
>>>> circuits, and label the components in a format that can easily be
>>>> imported into a MS WORD document. The software does not need to be
>>>To get your schematic into a word document, just export the image from
>>>the schematic capture, then import into word.
>>Importing images into Word as a bitmap is a bad idea. For reasonable
>>printing quality, you'll need at least 100dpi which is already HUGE
>>(which means Word gets extremely slow). Editing an image afterwards is
>>a total disaster...
>>The OP should really look into Microsoft Visio to embed vector bassed
>>images into Word.
$/2 if the OP can obtain it through a educational license.
Reply to nico@nctdevpuntnl (punt=.)
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup