The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Trevor Wilson"
References: <firstname.lastname@example.org> <email@example.com>
Subject: Re: Class B amplifiers: what are the large low-value resistors for?
Date: Fri, 15 Nov 2002 11:03:13 +1100
X-Newsreader: Microsoft Outlook Express 6.00.2720.3000
X-Mimeole: Produced By Microsoft MimeOLE V6.00.2600.0000
"Phil Allison" wrote in message
> "Trevor Wilson" wrote in message
> > > >**Not in this universe. There is only one brand of commerically
> > > >loudspeaker, which APPROACHES a resistive load. That brand would be
> > Magnapan
> JW wrote:
> > >
> > > Not entirely true, I think. Some of the KEF models had/have Zobel
> > > networks to make their impedances almost purely resistive.
> > **Not quite. I believe the Zobels were for the upper bass, lower mids
> > lower treble. There were no Zobels to cover the bass humps.
> *** There was a version of the 104 that was resistive across the audio
> band. Series tuned circuits were used as conjugates to cancel out the
> bass humps.
> The impedance was 6 ohm + /- 10 % 20 to 20 K
**AFAIK, the Zobels were not applied to the bass section. I will be happy to
be corrected on this, by anyone who has performed the measurements. I have
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup