The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Peter Bennett
Subject: Re: Hello, Anyone have idea how to build a module for a Y-cable with 2 switches to activate a toy?
Date: Fri, 15 Nov 2002 10:03:26 -0800
Organization: Home for the Hopelessly Helpful
References: <firstname.lastname@example.org> <email@example.com>
X-Newsreader: Forte Agent 1.8/32.548
On 15 Nov 2002 07:27:18 -0800, firstname.lastname@example.org (Ti) wrote:
>Can you tell more specific? I believe that we need a control box in
>order to activate the toy. And of course the two switches have to be
>connected to the control box.
> What do i need to build a control box?
If one switch will normally activate the toy, with no additional
electronics, you don't need any electronics to make two switches
control it - if both switches must be operated to activate the toy,
just connect them in series.
Peter Bennett VE7CEI
GPS and NMEA info and programs: http://vancouver-webpages.com/peter/index.html
Newsgroup new user info: http://vancouver-webpages.com/nnq
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup