The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: firstname.lastname@example.org (Jeff)
Subject: Re: Washing PCB's after soldering...with what?
Date: 21 Nov 2002 09:56:53 -0800
NNTP-Posting-Date: 21 Nov 2002 17:56:53 GMT
email@example.com (Bob Wilson) wrote in message news:...
> In article <firstname.lastname@example.org>,
> email@example.com says...
> >"PCS Electronics" wrote in
> > news:...
> >> We're hand-soldering (small series) our PCBs and are
> >> wondering what would be the best chemical for washing
> >> the boards afterwards.
> >> We've tried Acetone and Ethanol, the first is way too strong as
> >> it melts the caps and other plastic, the second (Ethanol - alcohol)
> >> leaves the PCB looking very dry and ugly with white powder
> >> where the soldering paste used to be.
> >> Does anyone here have experience with this kind of stuff?
> >Assuming you are using rosin core solder:
> >I use Ethanol first, scrubbing the board thoroughly at the rosin
> >residue with a solvent brush and rinsed under water. Then, I spray the
> >board with 409 household cleaner; scrubbing lightly with an ordinary
> >brush under running water, then use compressed air to dry it out.
> >Sparkles like new.
> >Jeff in AZ
> One has to wonder why you are doing this, when there are so many better
> methods (such as using a proper blend of solvents, or even a saponifier in
> water). I often wonder why hobbyists seem to want to use the most oddball
> approach to cleaning PCBs, when there is all sorts of data out there
> explaining how to do it properly and simply. Well at least you're not using
> brake fluid, like some guy recommended some time ago!
Bob, perhaps before you should do an analysis of the solvent I
recommended before dismissing it to a hobby oddball approach.
You might find that some of us have considerable insight to the issues
we offer advice on.
Go have a swig of the brake fluid you associated my recommendation
Jeff, in AZ
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup