The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
NNTP-Posting-Date: Fri, 22 Nov 2002 00:00:39 -0600
Subject: Re: 9VDC Heater?
Date: Thu, 21 Nov 2002 22:00:59 -0800
X-Newsreader: Forte Agent 1.91/32.564
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
On Thu, 21 Nov 2002 17:33:29 +0100, "Gnekker"
>"J81" wrote in message
>> I'm wondering if it's possible to use a 9V battery to heat a coil of
>> wire or a metal plate to around 125 degrees Celsius. Warmup time isn't
>> a concern; I just need the plate to be at ~125 or more degrees Celsius
>> for about five seconds, powered from a 9V battery. Whether or not it
>> uses all of the charge in the battery is not a concern.
>> Thanks in advance.
>Hey, what are you trying to make? A bomb detonator?
*chuckle* no, no. I just need some on-the-spot heat to generate a
chemical reaction for an experiment I'm doing, but I need it to be
portable so I can take it out in the field. I can't use an open flame
because of its uncontrolled nature and the fact that they blow out. I
wanted something reliable and battery-powered. I know it's a bit of an
odd question, but I assure you that nothing will be exploding aside
from a capacitor here or there. ;)
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup