The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Klaus Vestergaard Kragelund"
Subject: Re: Before I Submit A Board To Olimex...
Date: Sat, 23 Nov 2002 11:27:58 -0500
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
Organization: TDC Internet
"Gary Brown" wrote in message
> I am about to submit my first board design to Olimex for fabrication.
> I have very little experience with board manufacture. What should I
> check for before I submit? This is a single, small board designed with
> Eagle 4.09.
> Particularly, 10 mil lines for signals and 16 mil for power are sufficient
> electrically but should they be wider for more reliable fabrication?
> Many seem to have problems with silkscreen sizes. I see sizes .07
> .05 and ratios of 8% and 10%. (I have no idea what these mean.)
> Are these adequate?
They have detailed info on their website concerning precise what to watch
out for - at least to get the PCB produced. Concerning your tracks of 10mil
and 16mil, thats more than enough from what I have experienced from Olimex.
Their quality is really remarkable at that price.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup