The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
NNTP-Posting-Date: Sun, 24 Nov 2002 15:07:01 -0600
From: "David Jones"
Subject: Re: which microcontroller should I choose.
Date: Sun, 24 Nov 2002 16:02:11 -0500
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
"Wouter van Ooijen (www.voti.nl)" wrote in message
> >I've been researching microcontrollers but there are just tons and tons.
> >have no idea which to choose. I can program in assembly. I need it to
> >serial info from my computer, output about 32 or slightly more bits in
> >parallel and input some video from a homemade robot and send that back to
> >the computer. any suggestions?
> I have document 'start with PICs' at http://www.voti.nl/swp. Besides
> information about starting with PICs there is also a lot about how to
> choose a (first) microcontroller. One-line executive summary: choose
> the brand on non-technical arguments (like help available from an
> experieneced user), then choose within the brand on technical grounds.
> But by all means choose an ICSP flash uC.
> Output 32 bits: either take a 40-pin chip, ort take a smaller one and
> some 74HC595.
> Video: except maybe for a Ubicom SX no microcontroller can handle
> Wouter van Ooijen
> -- ------------------------------------
> PICmicro chips, programmers, consulting
Thanks, that was helpful.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup