The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
NNTP-Posting-Date: Wed, 27 Nov 2002 11:09:46 -0600
From: "Arthur Jernberg"
References: <55WE9.firstname.lastname@example.org> <2eXE9.6190$GR5.email@example.com> <3DE4ED67.firstname.lastname@example.org>
Subject: Re: Using PC as signal generator...
Date: Wed, 27 Nov 2002 12:09:45 -0500
X-Newsreader: Microsoft Outlook Express 6.00.2720.3000
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
Or an improper reference point between the HV developing circuit and the Pc
will present severe shock hazzards to both the equiptment and the operators.
"Rene Tschaggelar" wrote in message
> Jordan wrote:
> > Lol.. sorry for not specifying. I mostly want to use it at around
> > 15KHz to pulse a square wave to a flyback transformer for my HV
> > I've built this circuit
> > (http://4hv.org/schematics/info.cgi?entry=universal), based on a 555
> > which works fairly well but I want a larger range and a bit more
> I wouldn't recommend using a PC for that sort of experiments.
> A small slip with the screwdriver and the PC is fried.
> Ing.Buero R.Tschaggelar - http://www.ibrtses.com
> & commercial newsgroups - http://www.talkto.net
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup