The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Donald Castonguay
X-Mailer: Mozilla 4.75 [en] (Win98; U)
Subject: Re: Need help with tri leds
Date: Thu, 28 Nov 2002 01:44:02 -0500
NNTP-Posting-Date: Thu, 28 Nov 2002 00:43:24 EDT
Organization: AT&T Canada IES
This circuit was given to me with the resistors burnt black, so this
is the only reason I came to this news group to see if anyone of you
genius's would know what resistors I could use but by the looks of
it I guess I should have asked my 1year old grandson.
> "Bob Wilson" wrote in message
> > In article , email@example.com
> > says...
> > >
> > >I have a 12volt led circuit there are 6 tri leds in paralell and wath I
> > need
> > >to know
> > >is wath value of resistor should I have to make them glow red.
> > >Thank you
> > >Don
> > >
> > >
> > You need (needth?) a 2.2K resistor. That is because all 3 colour bands are
> > red. To make it glow green, you need a 5.5Meg resistor (3 green bands).
> > Bob.
> ha haa
> the 5.5 Meg is for low current operation huh ? :)
> he is using tri-colour LEDs, i suggest you wire up the RED wire to make them
> glow RED :)
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup