From: Spehro Pefhany
Subject: Re: ? Binary to BCD conversion chip ?
References: <email@example.com> <6qjF9.160687$QZ.26861@sccrnsc02>
X-Newsreader: Forte Agent 1.92/32.572
Date: Thu, 28 Nov 2002 14:32:31 GMT
NNTP-Posting-Date: Thu, 28 Nov 2002 09:32:31 EST
On Thu, 28 Nov 2002 07:17:22 GMT, the renowned "Yi-Zen Chu; Yiren Qu"
<""y i z e n \"@ u c l i n k 4 . b e r k e l e y
. e d u> wrote:
>Thanks for responding to my questions.
>Could you guys educate me on what an EPROM
Erasable programmable read-only memory. Some EPROMs are not
erasable, but rather than calling them ROMs (which would cause
confusion with mask-ROMs etc.) we call them OTP EPROMs.
(one time programmable). You may wish to use an erasable part or
an EEPROM or FLASH (the latter are electrically erasable
equivalents) for your initial tests.
Here is a suitable x16: http://www.atmel.com/atmel/acrobat/doc0019.pdf
and an x8: http://www.atmel.com/atmel/acrobat/doc0015.pdf
>electronics. How do I program it?
Create an Intel hex file (see my web page for the format),
and use a programmer. Test, if not correct, rinse and repeat.
"it's the network..." "The Journey is the reward"
firstname.lastname@example.org Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.co