The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
NNTP-Posting-Date: Thu, 28 Nov 2002 22:45:53 -0600
From: "Dave VanHorn"
References: <email@example.com> <firstname.lastname@example.org>
Subject: Re: Cheap 'n' nasty subwoofer amplifier
Date: Thu, 28 Nov 2002 23:46:40 -0500
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
"Al Borowski" wrote in message
> "Dave VanHorn" wrote in message
> > > You should also be concerned about voltage, for 100W into 4 Ohms you
> > > need +/- 28 Volts output swing which is quite a lot for an op amp.
> > The LM-12 opamp will handle this quite nicely.
> so voltage issues aside, do you think I could make a decent amp using
> a single op amp, a few transistors and a handful of passives?
The LM-12 will do 35 or 40V rails, IIRC, and you won't need anything else
except a pair of gain setting resistors.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup