The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "John Jardine"
Subject: Re: LMH6643 Video Driver Question
Date: Fri, 29 Nov 2002 23:06:03 -0000
NNTP-Posting-Date: 29 Nov 2002 22:54:06 GMT
X-Newsreader: Microsoft Outlook Express 5.00.2615.200
X-Mimeole: Produced By Microsoft MimeOLE V5.00.2615.200
M.K <[spam]firstname.lastname@example.org> wrote in message
> I am building a CCT similar to the one noted in the below link
> I am useing CAT-5 as the medium and i would like to incorperate an audio
> signal into this driver. Any Suggestions how i would go about doing such a
> the video only requires 2 conductors out of the cat-5's 8. would spliting
> up the stereo signal into L + R Channels and transmiting them each work ?
> would i get too much distortion?
> 2 wires for video
> 2 wires for L channel
> 2 Wires for R channel
> could i pull off 2 power wires ? or am i pushing it ?
> i would apprieciate any input from anybody :)
Marc. Sound perfectly OK using the 6 wires + 2 for power.
(Putting the audio on top of the video would be very messy.)
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup