The Cyber-Spy.Com Usenet Archive Feeds Directly From The Open And Publicly Available Newsgroup Sci.Electronics.Design
This Group And Thousands Of Others Are Available On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic, Opinions Or Content Posted To This Or Any Other Newsgroup. This Web Archive Of The Newsgroup And Posts Are For Informational Purposes Only.
From: "M.K" <[spam]marc@rcc.on.ca>
Newsgroups: sci.electronics.design
References:
Subject: Re: LMH6643 Video Driver Question
X-Newsreader: Microsoft Outlook Express 6.00.2720.3000
Message-ID:
Date: Sat, 30 Nov 2002 21:55:54 GMT
NNTP-Posting-Host: 24.102.83.196
NNTP-Posting-Date: Sat, 30 Nov 2002 16:55:54 EST
I have an FTP if anyone wants to send me the Files
Thanks
M.k.
"M.K" <[spam]marc@rcc.on.ca> wrote in message
news:VJOF9.212438$MGm1.180514@news02.bloor.is.net.cable.rogers.com...
>
>
> I am building a CCT similar to the one noted in the below link
>
>
> http://www.national.com/appbriefs/files/AppBrief116.pdf
>
>
> I am useing CAT-5 as the medium and i would like to incorperate an audio
> signal into this driver. Any Suggestions how i would go about doing such a
> mod?
>
> the video only requires 2 conductors out of the cat-5's 8. would spliting
> up the stereo signal into L + R Channels and transmiting them each work ?
or
> would i get too much distortion?
>
> so....
>
> 2 wires for video
> 2 wires for L channel
> 2 Wires for R channel
> could i pull off 2 power wires ? or am i pushing it ?
>
>
> i would apprieciate any input from anybody :)
>
>
> thanks
>
> Marc
>
>
>
>
>
>
Go Back To The Cyber-Spy.Com Usenet Web Archive Index Of The sci.electronics.design Newsgroup
|