The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: John Woodgate
Subject: Re: Inductor used in 110v to 15v
Date: Sun, 1 Dec 2002 05:38:39 +0000
Organization: JMWA Electronics Consultancy
Reply-To: John Woodgate
NNTP-Posting-Date: Sun, 1 Dec 2002 07:58:58 +0000 (UTC)
X-Newsreader: Turnpike (32) Version 4.01 <5Z8C9wtxbnpWyFnyfFzqmVF739>
I read in sci.electronics.design that Da Man
wrote (in <4PbG9.2$GJ4.firstname.lastname@example.org>) about 'Inductor used in
110v to 15v', on Sat, 30 Nov 2002:
>"Gibbo" wrote in message
>> "Kevin Aylward" wrote:
>> >dataylor wrote:
>> >> Hello:
>> >> Can you tell me which wire gauge and which wire length I will need
>> >> for the inductor in a 110 volt input/15 volt output 30 amp
>> >> transformer? Also, which diodes will I need to convert AC to DC?
>> >> Many Thanks,
>> >With all due respect here, you question really requires the advice, go
>> >and buy a *safe* commercial power supply wall wart. You only gonna kill
>> >yourself otherwise.
>> A 15 volt 30 amp wall wart ?
>The scary part is that it could possibly be done! Just impractical. Think of
>how small a switchmode power supply can be!
The only impractical bit is the strain on the wall socket. You could
hang a lot of mass off an IEC 16 A or 32 A industrial connector.
Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk
Interested in professional sound reinforcement and distribution? Then go to
PLEASE do NOT copy news posts to me by E-MAIL!
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup