The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Phil Allison"
References: <email@example.com> <firstname.lastname@example.org>
Subject: Re: parallelling two transformers - related
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
Date: Sun, 8 Dec 2002 21:18:41 +1100
NNTP-Posting-Date: Sun, 08 Dec 2002 21:07:26 EST
Organization: Telstra BigPond Internet Services (http://www.bigpond.com)
"1198" wrote in message
> This idea just cross my mind. What if I connect two identical transformers
> with primaries rated at 110V in serial to a 220V AC main and parallel the
> secondaries? Isn't this assured the current into the transformers will be
> the same?
** Yes, that always works fine.
But do not do what I saw one maker do (Perreaux) and series both the
primary and secondaries then load the rectified DC rails unsymmetrically. A
50 mA difference (due to a speaker relay system) upset the DC rail voltages
by 12 % in a 1000 watt amplifier.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup